Dragonfly Duct Tape Clutch

There are thousands of duct tape creations out there in the world.  I've made roses, wallets and even a dress form from duct tape.  On a shopping trip to Michael's with my friend Amber, we discovered this leaflet that provides direction on how to make a duct tape purse. 

Click on the picture to enlarge it, so you can make one too! 

You don't need all the materials listed other than duct tape.  For the other things just use whatever you have around the house.

I wasn't so impressed with the leaflet, but the actual example was displayed and it was great. I especially liked the stickers that were used to personalize it.

Luckily for me my mom recently gave me some duct tape.

Since my mom gave me the duct tape, it is only fair that the clutch should be made and personalized for her.

I thought using lightweight cardboard would make the clutch more substantial.  It seemed like a good idea at first. Don't use anything thicker than printing paper.  This cardboard made the clutch stiff and it was impossible to attach a snap closure.

But I'm getting ahead of myself.  I covered the cardboard on the front and back and added a purple strip in the middle. 

I trimmed the edges of raw duct tape and took the piece to the measuring board.  The fold seemed correct at 3.5 inches so after it was measured off, I used a straight edge to help get a good top and bottom fold. I used purple duct tape to trim all the edges of the clutch.  After the edges were trimmed, I secrued the bottom fold with another strip of purple duct tape on either side.

Next, it was time for the personalization.  Using clip art from Windows Word was the easy way to approach this.  A dragonfly was selected and transferred to Paint.

Clear packing tape works well to adhere the piece to the clutch.

I used a seam ripper to slice an opening in the top fold's crease so that the handle, which was constructed by putting two pieces of duct tape together-sticky side to sticky side, could be pulled through. One strip of duct tape should be an inch longer than the other so that it can stick to the clutch.  Here the purple is on the outside and the lime is on the inside of the strap.

The finished product looks ok, but looks can be deceiving.  The snap in non-functional, and the purse is too stiff to put much inside.

I decided to try again and not use the cardboard.  Instead, I used a sales paper cut in half.

I covered it the same way as the first one, but instead of the strap being in the middle, it is on the side.

Also the personalization was made a bit more personal.  I used a combination of the Paint application and Microsoft Word to create a nameplate for the clutch.

Using clear packing tape, I added the nameplate to the back of the clutch on the middle strip so that it would POP!

Then it was time to add the strap and the closure.

The strap was the easy part.  It was made the same way as the original, but it was applied to the side.

The snap was also much easier than on the original clutch.  The prongs were able to penetrate less material with ease.

I decided to add an inside pocket using just four strips of duct tape.  The duct tape on the inside of the pocket is an inch or so shorter than the duct tape on the outside pocket.

This clutch opens wide and is much softer and nicer than the first one I made. It even looks good on the wrist.

Give this project a try if you have a little bit of time and a couple of rolls of duct tape.  It is quick and easy! 

I did not provide step by step instructions because it's kind of a trial an error project, but if you have any questions, please ask.  Have fun!

p.s. Mama, I will give this to you the next time we see each other.  Keep it out of the heat because that will make the sticky stuff ooze out.

Made another one....Who could I give this one too?  Umm?